Use the Chloride Calibration Solution to calibrate chloride Ion Sensitive Electrodes (ISEs) for the Aqua TROLL 500 and A

pH buffer solution

Use this versatile device to monitor just about any environmental sensor. 

The IP68 HVFlo system supports Doppler velocity and level measurement sensors for challenging environments in which the

The FloPro XCi monitors wastewater, stormwater and industrial flows in full pipes, partially full pipes, and open channe

Combine the WaterWatch² Expansion Box with the 7300w² Monitor to support up to eight sensors per monitor.

The core product in the WaterWatch range - the 7300 Monitor provides all the user interface and system configuration

Stable and repeatable solid state standard to perform RFU calibrations and checks on the Aqua TROLL Crude Oil sensor.

Extends deployment of the Aqua TROLL 500, 600, 700 and 800.

Stable and repeatable solid state standard to perform RFU calibrations and checks on the Aqua TROLL Fluorescein WT senso

Stable and repeatable solid state standard for RFU calibration and checks on the Aqua TROLL FDOM sensor.

Removes biological growth from RDO sensors with a blast of compressed air.

Calibration cup and sponges to perform RDO Blue calibration.

The RDO Copper Guard can be threaded onto the RDO Blue for reliable protection.

Use a MACE ZX SnapStrap to install this sensor inside a pipe in minutes. This  adjustable polypropylene with mounting ac

Everything you need to perform 2-point dissolved oxygen calibrations on Aqua TROLL 400, Aqua TROLL 600, RDO PRO, RDO PRO

Improves accuracy of your data and proglongs the length of your deployment of RDO PRO and RDO PRO-X Probes.

This copper pressure sensor nose cone extends Aqua TROLL 200 and Level TROLL 400/500/700 deployments.

This complete system includes a copper pressure sensor nose cone and conductivity sensor guard.

Replacement desiccant for the Aqua Troll 600

Calibration kit for RDO PRO probes.

Calibration cup for an Aqua TROLL 100/200.

Sodium sulfite (Na2SO3) calibration solution and DI water when calibrating at 0% saturation.

NIST-traceable conductivity solutions for low-range, high-range, or full-range calibrations.

NIST-traceable turbidity calibration solution (polymer suspension) for Aqua TROLL in 500 mL volumes. Available in 10 NT

Calibration standard for ORP/Redox electrodes.

NIST-traceable calibration solution. Available in pH 4, 7, or 10 in various volumes.

NIST-traceable conductivity solutions for low-range, high-range, or full-range calibrations.

Protects instruments and cables during deployments.