The mini ChlorAm Analyzer provides timely process chemistry measurements to optimize the chloramination process. 

Use the Chloride Calibration Solution to calibrate chloride Ion Sensitive Electrodes (ISEs) for the Aqua TROLL 500 and A

The mini Analyzer provides accurate, reliable and affordable single parameter analysis.

Use to wirelessly connect an In-Situ instrument to a mobile device and the VuSitu mobile app.

Use this versatile device to monitor just about any environmental sensor. 

The UV-2250 Analyzer provides online monitoring of up to four sample lines, single parameter

​​The UV-4200 Analyzer provides online monitoring of one or two sample lines, up to four parameters

The UV-3250 Analyzer provides online monitoring of up to eight sample lines, single or dual parameters

The UV-2250/S analyzer provides process chemistry measurements to control the chloramination process

The IP68 HVFlo system supports Doppler velocity and level measurement sensors for challenging environments in which the

The FloPro XCi monitors wastewater, stormwater and industrial flows in full pipes, partially full pipes, and open channe

Connect a Level TROLL,  and Aqua TROLL, to a PC or RuggedReader.

Connect your cabled Rugged TROLL 200 or Rugged BaroTROLL Data Logger and a computer or RuggedReader Handheld PC.

Connects a stripped-and-tinned RDO PRO-X Probe, RDO PRO Probe, or Aqua TROLL 400 Instrument to a computer.

Stable and repeatable solid state standard to perform RFU calibrations and checks on the Aqua TROLL Crude Oil sensor.

Stable and repeatable solid state standard to perform RFU calibrations and checks on the Aqua TROLL Fluorescein WT senso

Stable and repeatable solid state standard for RFU calibration and checks on the Aqua TROLL FDOM sensor.

Use the Rugged TROLL Docking Station to program data loggers and download data.

Calibration cup and sponges to perform RDO Blue calibration.

Use a MACE ZX SnapStrap to install this sensor inside a pipe in minutes. This  adjustable polypropylene with mounting ac

Everything you need to perform 2-point dissolved oxygen calibrations on Aqua TROLL 400, Aqua TROLL 600, RDO PRO, RDO PRO

Replacement desiccant for the Aqua Troll 600

Calibration kit for RDO PRO probes.

Calibration cup for an Aqua TROLL 100/200.

Sodium sulfite (Na2SO3) calibration solution and DI water when calibrating at 0% saturation.

NIST-traceable conductivity solutions for low-range, high-range, or full-range calibrations.

NIST-traceable turbidity calibration solution (polymer suspension) for Aqua TROLL in 500 mL volumes. Available in 10 NT

Calibration standard for ORP/Redox electrodes.

NIST-traceable calibration solution. Available in pH 4, 7, or 10 in various volumes.