The mini ChlorAm Analyzer provides timely process chemistry measurements to optimize the chloramination process. 

Transmits real-time data via the Iridium Satellite network to the In-Situ Data Center.

The mini Analyzer provides accurate, reliable and affordable single parameter analysis.

VuLink® cellular telemetry makes remote monitoring practical, secure and effective, for less than you’d expect.

Use this versatile device to monitor just about any environmental sensor. 

The UV-2250 Analyzer provides online monitoring of up to four sample lines, single parameter

​​The UV-4200 Analyzer provides online monitoring of one or two sample lines, up to four parameters

The UV-3250 Analyzer provides online monitoring of up to eight sample lines, single or dual parameters

The UV-2250/S analyzer provides process chemistry measurements to control the chloramination process

The mini outdoor enclosure is a turnkey solution for the housing of the mini analyzer and related items.

Measures and records water level and pressure, conductivity and temperature. Vented or non-vented.

Measures and records conductivity and temperature.

In-Situ’s premier water level logger, ideal for groundwater professionals who require higher data resolution, expanded m

A cost-effective, sub 1-inch, vented option suited for a variety of fresh, saline and contaminated water applications. 

Measures and logs water level, water pressure and temperature in a low-maintenance system. Ideal for long-term monitorin

This premium water level data logger, available in a vented (35ft (11m)) configuration, exceeds USGS surface water stage

Use the BaroTROLL Data Logger with non-vented (absolute) In-Situ instruments to conveniently measure and log barometric

Measures and logs water level, water pressure and temperature. This economical, non-vented (absolute) water level logger

In-Situ’s most economical option for measuring and logging water level, water pressure and temperature. Use this durable

The IP68 HVFlo system supports Doppler velocity and level measurement sensors for challenging environments in which the

The FloPro XCi monitors wastewater, stormwater and industrial flows in full pipes, partially full pipes, and open channe

The VuLink CI certified antenna is an IP67-rated, external mount antenna ideal for use in small spaces.

The FlexTech Monitor Bracket is designed to attach the 7300w² and 8200w² monitors to a vertical or horizontal handrail.

Use the FlexTech mounting shaft with FlexTech brackets to mount any of our in-tank sensors.

Use these stainless-steel mounting brackets to attach your monitoring equipment to handrails at monitoring sites.

This bracket extension allows installation of our sensors in a wide range of applications.

Stable and repeatable solid state standard to perform RFU calibrations and checks on the Aqua TROLL Crude Oil sensor.

Stable and repeatable solid state standard to perform RFU calibrations and checks on the Aqua TROLL Fluorescein WT senso

Stable and repeatable solid state standard for RFU calibration and checks on the Aqua TROLL FDOM sensor.

Calibration cup and sponges to perform RDO Blue calibration.